Description

The DC-EURO 2500mA Eurorack power supply busboard is the most powerful we offer here at Beepboop.

Capable of delivering 1.25A on both the +12 and -12 rail simultaneously when using a GSM40A18-P1J power brick.

The power supply is integrated onto a Eurorack Busboard with 13 power header sockets!

if you need more sockets a Beepboop 42hp busboard can be wired directly using the screw terminals. (available via link 👇)

48HP Eurorack Power Busboard Pair

There are three orange LED indicator on the busboard representing +5, +12 and -12 volts.

The power supply busboard accepts and works well with a wide range of input voltages from 9 – 18V.

We recommend these high quality Meanwell medical grade power bricks. (GSM40A18-P1J)

The shape of the PCB and M3 mounting holes makes it easy to position the PCB inside your case making it possible to plug directly in the board.

Alternatively you can install an external jack wired to this cable to plug into the PCB jack.

kenable DC Pigtail Power Plug 5.5 x 2.1mm To Bare Ends For CCTV Cab… | Kenable https://share.google/88wvzUsXhUXrCbf3A

….but soldering this requires experience with electronics and if done at your own risk. A multimeter can be used to test which pin of the jack is wired to each wire in the cable.

Here is an example;

2.1mm x 5.5mm Metal Panel Mount DC Power Socket — Switch Electronics | Your One Stop Component Shop https://share.google/XeSb7ZuEdG24mhLKY

Ensure that the positive tip of the connecting cable is wired to the corresponding centre pin on the female jack installed.

The Ground wire from the connecting cable must be wired to the permanent ground of the Female jack.

PCB dimensions

length x width x height

22.2cm X 6cm x 2.2cm